Aromatics

Aromatic products including benzene, toluene, ortoxylene and xylene feature similar attributes. They are colourless, highly flammable and toxic liquids each with a characteristic odour. Aromatic products are applied across different industries mainly as solvents or feedstock in production of numerous goods, which, in fact, are widely used in our everyday lives. MOL Group’s aromatic products can be used as chemical feedstock, intermedier or ingredients. The usability of aromatics is wide from polymer production through applying as a degreasing agent to use as solvents for paints.   Aromatic products of MOL Group: Benzene Benzene is an important organic chemical compound, which is a natural constituent of crude oil and is one of the elementary petrochemicals. It is colourless and highly flammable liquid with a sweet smell, and is responsible for the aroma around petrol stations. Benzene is an essential chemical feedstock in the production of diverse intermediate products, e.g. polymer plastics, synthetic fibers, detergents and solvents. You can purchase benzene from two refineries – Százhalombatta, Hungary, and Bratislava, Slovakia. Delivery is possible via road tank cars and rail tank cars. For Material Safety Datasheet regarding benzene please click here – MOL, Slovnaft. For Technical data sheet please click here – MOL, Slovnaft. For Aromatics loading map please click here – MOL, Slovnaft Personal protective equipment, Slovnaft TIR. Toluene Toluene is a colourless, water-insoluble liquid with the smell associated with paint thinners. Toluene is used as an industrial feedstock. It is consumed in the manufacture of toluene diisocyanate used as a raw material for the polyurethane foams’ production. Toluene also serves as an octane improver in gasoline as well as a solvent for paints, paint thinners, silicone sealants, glues and many other organic compounds. You can purchase toluene from two refineries – Százhalombatta, Hungary, and Bratislava, Slovakia. Delivery is possible via road tank cars – until 24 tons – and rail tank cars – until 55 tons. For Material Safety Datasheet please click here – MOL, Slovnaft. For Technical data sheet please click here – MOL, Slovnaft. For Aromatics loading map please click here – MOL, Slovnaft Personal protective equipment, Slovnaft TIR. Xylene Xylene is a major petrochemical produced by catalytic reforming and also by coal carbonisation in the manufacture of coke fuel. Xylenes are mainly produced as part of the BTX aromatics (benzene, toluene and xylenes) extracted from the product of catalytic reforming known as "reformate". The mixture is a slightly greasy, colorless liquid commonly encountered as a solvent. In case of slower drying is required toluene is often substituted by xylene solvent. Xylene acts as a degreasing agent and is applied in rubber, adhesives and leather industries, in the production of pesticides, as an intermediate in the manufacture of certain polymers, in petroleum distillation, and in histology laboratories. You can purchase xylene from two refineries – Százhalombatta, Hungary, and Bratislava, Slovakia. Delivery is possible via road tank cars – until 24 tons – and rail tank cars – until 55 tons. For Material Safety Datasheet please click here – MOL, Slovnaft. For Technical data sheet please click here – MOL, Slovnaft. For Aromatics loading map please click here – MOL, Slovnaft Personal protective equipment, Slovnaft TIR. Ortoxylene Ortoxylene is the second largest commercial isomer of xylene. Ortoxylene is a key-ingredient for producing phthalic anhydride (PAN). PAN is strongly connected to housing market because it’s an important ingredient of PVC and thus. Also used as alkyd resins in solvent-based paints. You can purchase ortoxylene from two refineries – Százhalombatta, Hungary, and Bratislava, Slovakia. Delivery is possible via road tank cars and rail tank cars. For Material Safety Data Sheet regarding Ortoxylene please click here – MOL, Slovnaft. For Technical data sheet click here click here. For Aromatics loading map please click here – MOL, Slovnaft Personal protective equipment, Slovnaft TIR.   MOL Group provides small-packed Aromatics, please visit our website: www.molracing.hu for further details and contacts.   Why to choose MOL Group’s aromatic products? MOL Group has a favourable production site allocation for aromatic products, producing them both in Danube Refinery, Százhalombatta, Hungary and in Bratislava Refinery, Slovakia. We apply high safety standards during the production process, as well as during transportation and provide you with cost-efficient and environmentally friendly products. From Xylene and Toluene, MOL Group provides “crude oil” quality – minimum 99,7 % purity – in 2 refineries.

Aliphatics

The elements of the aliphatic products make MOL Group’s Special Gasoline segment. For wider usage, MOL Group provides three types of aliphatic solvents with different boiling points: Dunasol, normal-hexane and white spirit. MOL Group’s aliphatics can be used in several ways, like cleaning oil surfaces to extract various vegetable oils.   MOL Group’s aliphatic products: Dunasol Dunasol is a solvent of low aromatics and sulphur contents. MOL Group offers three Dunasol types with increasing boiling points from 80°C - 220°C, enabling coverage of various industrial needs. In MOL Group’s portfolio there are three types of Dunasol products with different boiling points: Dunasol 80/110, 150/200, and 180/220. Dunasol is used in lacquers, paints and waxy ointments productions as well as for cleaning oily surfaces. You can purchase Dunasol from the Danube Refinery – Százhalombatta, Hungary – and the delivery is possible via road tank cars and rail tank cars. For Material Safety Data Sheet regarding Dunasol products please click on the below links. Dunasol 80 Dunasol 150 Dunasol 180 Guarantee Specification please click on the below links Guarantee Specification Dunasol 80 110 Guarantee Specification Dunasol 150 200 Guarantee Specification Dunasol 180 220 For the Aromatics loading map of MOL please click here. Normal-hexane Normal-hexane is the C6 fraction containing minimum 55% of n-hexane, as well as iso- and cycloparaffins. It is used primarily as a solvent of chemical reactions such as polymerisation of olefins catalysed by coordination complex compounds, as a pharmaceutical solvent, in the extraction of various vegetable oils, or in various adhesive compositions. You can purchase normal-hexane from the Danube Refinery – Százhalombatta, Hungary – and the delivery is possible via road tank cars and rail tank cars. For Material Safety Data Sheet regarding Normal-hexane please click here. For Guarantee Specification N-hexan for EXTRACTION please click here. TSE BSE GMO certification – click here. TSE BSE GMO_N-hexan for Extraction – click here. N-hexane food Vendor declaration of compliance – click here. N-hexane Halal statement – click here. N-hexane Kosher statement – click here. White spirit White Spirit 150/200 is a non-corrosive solvent with a mild hydrocarbon odour and a narrow boiling range of 150-200°C containing paraffin, naphthenic and aromatics. This aliphatic product is widely used as coatings and cleaning agents in the paint, ink, dry cleaning and rubber industries. MOL Group continuously aims to improve white spirit to reach less sulphur content, narrower boiling point scale and to fit for specific purposes and for further usability. You can purchase white spirit from the Danube Refinery – Százhalombatta, Hungary – and the delivery is possible via road tank cars. For Material Safety Data Sheet regarding White spirit please click here. For Guarantee Specification WS 150_200 – click here. For Aromatics loading map - MOL – click here.   MOL Group provides small-packed Aliphatics, please visit our website: www.molracing.hu for further details and contacts.   Why to choose MOL Group’s aliphatic products? MOL Group applies high safety standards during the production process, as well as during transportation and provide you with cost-efficient and environmentally friendly aliphatic products. Get in contact with us! Dr. Nagyné Benedek Rita, Group Sales Expert, rbenedek@mol.hu

Maleic Anhydride

Maleic Anhydride (MAN, 2.5-furan-dion) is the anhydride of the simplest unsaturated dihydric carboxylic acid. It is a white, aromatic, crystalline, highly hygroscopic substance that is soluble in water while forming maleic acid. It also sublimates upon heating. It is suitable for polyester and polyalkide resins’ manufacturers, producers of varnishes, plasticizers, copolymers and lubricants.   How can you order MAN and how can it be delivered? MSA is produced by MOL Group in Danube Refinery (Százhalombatta, Hungary). MOL Group offers it in two forms: molten or solid (pastille). We deliver molten product in containers by insulated and heated road tank trucks. Hereby, minimum ordered volume is 1 truck load (ca. 19-24 tons net). Solid product can be transported either by rail tank or by road tank lorry. Minimum ordered volume is 1 ton, which equals 1 pallet. Pallets are packed in polyethylene bags of 25 kg each or in foil, a unit of 1000 kg each.   Why to choose MOL Group’s maleic anhydride? We apply high safety standards during the production process, as well as during transportation and provide you with cost-efficient and environmentally friendly MAN product. Loading map – Maleic anhydride – click here. New packaging bags – click here - back, front. Maleic anhydride (liquid) (108-31-6) – click here. MAA Kosher Halal 2023 v2 – click here. Specification MA MOL_1122_001 – click here. MAA_liquid_SL – click here. MAA_solid_SL – click here. Maleic anhydride (solid) MOL_1122_002 – click here. Conformity MA 2022 – click here. Maleic Anhydride pallets statement (003) – click here.

Base Oil

MOL Group produces 150ktpa Group I Base oils in its Hungarian refinery. Our high complexity Group I production chain and wide variety of feedstocks enable us to produce the highest quality straight cut Base oil products. MOL Group’s existing product portfolio consists of more than 20 grades, solvent neutral (SN) grades with Kinematic viscosity at 40°C from 7 to 240mm2/s and Brightstock. If you cannot find your product in our existing product portfolio, do not worry, we can tailor-made our products dedicated to your needs, or even develop a new product with dedicated feedstock and production settings. For easy comparison of the different qualities of our Base Oil products, please see Base Oil quality collection. Delivery DELIVERY ARRANGED BY THE CUSTOMER In order to help your driver to identify loading place in the Refinery, please see our maps with indicated loading points. Loading points - Base Oils Time window To shorten loading lead times and enable our Partners’ most efficient service, at the Base Oil loading sites time window booking is necessary. The time windows, with exact date and time of the loading are indicated on the Confirmation of order, sent on every Wednesday but latest 3 working days before loading. DELIVERY ARRANGED BY MOL We have contractual relationship with most of the major forwarder companies, and we choose the highest service quality and most competitive one in case of every single destination in order to supply our customers with the lowest possible delivery charges next to the highest service quality. TRANSPORT Mode of transportation: Road tank car / ISO container on truck Railway Barge Important information concerning the loadings: As the truck number is received from the Buyer, MOL Plc. will let Buyer know the loading number/ customer is able to check the loading reference nr. in ISA system. The drivers have to check in with this loading number at the refinery’s entrance. After that the driver has to fill in a data sheet: Carrier name + address; Driver(s) name; Vehicle Reg. Nr.; Goods name; Consignee (name, destination); Place of border crossing. The trucks are loaded based on their given time loading slot. Drivers must wear protective clothing (a boot, a long, abrasion-resistant suit/trousers, and a helmet) without these equipment the truck/tanker will not be allowed into the territory of the refinery. Mode of filling: upside. Road tank-car with flexi-bag or with trailer cannot be loaded, because our loading site is technically not prepared for these alternatives. Road tankers and ISO containers on road, RTC and ISO-container on railway (max 13m axle length) are allowed The parameters of road tank-cars should be: Height: 2.900-4.100 mm; Wide: max 3.000 mm; maximum 3 compartments. The road tank-cars can be loaded from 7.00 a.m. to 24.00. but MOL Plc. is able to hand out documents only until 22.00. Road trucks have to arrive 30 minutes before their scheduled time-window to ensure MOL’s daily loading plan. Order and shipping Minimum order: Road tank car: 22-24 t Railway: 50 t Barge: 800-1000 tons Information concerning ISA PORTAL MOL GROUP WEB ISA USER MANUAL MOLGROUP ISA Brossure Partner Portal registrational assistance What is ISA? ISA is a MOL internally developed online ordering system for our B2B customers. Current Features: bill downloading* COA, CMR, CIN downloading obtaining a loading number (this is useful for FCA transports) order status (blocked, enabled, loaded, invoiced) visibility of information after the loading balance credit limit bills * the commercial invoice can be downloaded, however, the correction, cancellation and proforma will only be available later Short tutorial video: How to get started? Go to this link in order to create a Partner Portal account Fill in all the requested fields at the “Account data” At the end of the Account data sheet, click on “Add new represented company” Give your partner code and company’s name. The partner code (SAP partner ID) can be found on your invoices. Please let us know if you registered then we activate your account. General info regarding the ordering process: first on email you need to ask your sales representative about prices and current availability if you receive the offer from our side you can register your order in ISA (the price won’t be visible) after the confirmation in email the loading number will be visible on ISA webpage the dispatch advice email is still working (sent by chemical_products@mol.hu) in the monitoring menu the following infos are available: Standard-based management system and certification To continuously improve the quality level of our products and services we operate and develop the Integrated Management System that complies with Quality (ISO 9001:2015), Environmental (ISO 14001:2015), Energy (ISO 50001:2011) and Occupational Health and Safety (OHSAS 18001:2007) standards. The application of comprehensive quality management tools significantly contributes to operational efficiency improvements, cost-reductions, the development of optimally regulated and reliable processes, as well as to the assurance of customer-focused, well-balanced and increasing product and service quality. Documentation(s) according to REACH regulation: Material Safety Data Sheet (MSDS) List of Unidentified Uses Technical Data Sheet (TDS) You can reach our certificates on: https://molgroup.info/en/about-mol-group/standard-based-management-systems-and-certifications ISO 9001:2015 (ENG) ISO 14001:2015 (ENG) ISO 45001:2018 (ENG) ISO 50001:2018 (ENG) Tailor-made product development Our customers can choose the best products which meets their requirements among our product portfolio. For those products where our customers have particular properties requirements, our Team of experts is ready to develop and tailor products and services according to their individual needs. We target to widen our tailor-made portfolio with variety of high-quality customer-dedicated products Let us know which are your requirements Our team will analyse and confirm if we have the possibility to undertake given development Creation of Product → Trial production result → Sending laboratory sample to customer → Industrial sample → Agreeing about the final product specification → TDS, New product Registration Sample sending Providing samples of requested products to our existing Partners and especially to the potential new ones to enable the best choice in product ordering. For the testing purposes we can deliver maximum 5 kg free samples from our products. For the successful sample dispatch, following data should be provided: Name of the company Address (for the sample dispatch) Contact person: Name/ Phone number/ E-mail address Product / Quantity If you are a New customer requesting a sample, before we can dispatch it, following steps are needed: Registration of your company in our system (usually takes 2-3 days). For receiving only a free sample, contract is not needed. After successful activation, we will request the sample and inform you about availability and ETA. Monitoring and measurement systems To provide the best service level to our Partners we have implemented monitoring and measuring systems which enables us to continuously improve in our processes. Customer Service Level (CSL&OTIF) measure Obtaining data and monitoring service performance enables us to focus on areas for improvements Key account Management Dedicated for the Strategical partners to ensure more proactive individually orientated service Complaint handling management Target: Investigate and analyse Determine root causes Propose corrective actions and improvements FAQ Base Oil Frequently asked questions (FAQ) Contact us You can reach out to us directly, using our common, product detailed mailbox: Base Oils: baseoil@mol.hu

Waxes

Wide range of both Paraffin waxes and Microcrystalline waxes are available in MOL Group’s product portfolio, in compliance with most of the market standards and regulations from candle making to food industry. Our wax products are available in Liquid, Slabs and Pastilles forms. MOL Group is also an ideal service provider of small producers due to the one pallet minimum order limit. Please contact us with your individual needs to serve you with our 50 years’ product development and technical service experiences. For easy comparison of the different qualities of our Waxes, please see Wax product Quality collection. MACRO PARAFFIN WAXES Macro Paraffin Waxes are mainly used in candle industry and in different industrial applications. Product names reflects to the melting point of the given product. E.g. FR DWC 5456 - Fully refined Candle grade Paraffin wax with melting point between 54 and 56°C. Macro Paraffin Waxes are available in Liquid, Slab and Pastille form. Our Macro Paraffin waxes are available in Candle grade (DWC) and FDA grade (DWC-EX) qualities. For different tailor-made products, please contact us. MICRO WAXES Micro Waxes are used in food applications, packing and other special applications. Product names reflects to the congealing point of the given product. E.g. FR DMWF 7883 - Fully refined FDA quality wax with congealing point between 75 and 80°C. Micro Waxes are all available in Liquid. DMWF 7883 and DMWF 7478 are also available in Slabs form. Our Micro Waxes are available in FDA grade (DMWF) and E905 grade (E905 DMWF) qualities. For different tailor-made products, please contact us. Other waxes Other Waxes are mainly used in emulsions and petroleum jelly production, also as a blending component for wax-based applications. Other Waxes are all available in Liquid. Dipping Wax, DDW 100 is also available in Slabs form. For different tailor-made products, please contact us. Delivery DELIVERY ARRANGED BY THE CUSTOMER In order to help your driver to identify loading place in the Refinery, please see our maps with indicated loading points. Loading points - Micro wax Loading points - Paraffin Waxes and Foots Oil Time window To shorten loading lead times and enable our Partners’ most efficient service, at the Liquid Wax loading sites time window booking is necessary. The time windows, with exact date and time of the loading are indicated on the Confirmation of order, sent on every Wednesday but latest 3 working days before loading. DELIVERY ARRANGED BY MOL We have contractual relationship with most of the major forwarder companies, and we choose the highest service quality and most competitive one in case of every single destination in order to supply our customers with the lowest possible delivery charges next to the highest service quality. TRANSPORT Paraffins can be shipped in liquid and solid (slabs and pastilles) form. Mode of transportation: Liquid by road tank cars Solid by road tank cars or by container for overseas markets Departure ports for containers are Koper (Slovenia) and Hamburg, Bremerhaven (Germany) Important information concerning the loadings: As the truck number is received from the Buyer, MOL Plc. will let Buyer know the loading number/ customer is able to check the loading reference nr. in ISA system. The drivers have to check in with this loading number at the refinery’s entrance. After that the driver has to fill in a data sheet: Carrier name + address; Driver(s) name; Vehicle Reg. Nr.; Goods name; Consignee (name, destination); Place of border crossing. The trucks are loaded based on their given time loading slot. Drivers must wear protective clothing (a boot, a long, abrasion-resistant suit/trousers, and a helmet) without these equipment the truck/tanker will not be allowed into the territory of the refinery. Mode of filling: upside. Road tank-car with flexi-bag or with trailer cannot be loaded, because our loading site is technically not prepared for these alternatives. Road tankers and ISO containers on road, RTC and ISO-container on railway (max 13m axle length) are allowed The parameters of road tank-cars should be: Height: 2.900-4.100 mm; Wide: max 3.000 mm; maximum 3 compartments. The road tank-cars can be loaded from 7.00 a.m. to 24.00. but MOL Plc. is able to hand out documents only until 22.00. Road trucks have to arrive 30 minutes before their scheduled time-window to ensure MOL’s daily loading plan. Order and packaging MINIMUM ORDER AND MAXIMUM ROAD TANK CAR LOADING WEIGHT Minimum orders in case of: Solid: 1 pallet Liquid: 22-24t Maximum road tank car loading weight (FTL) Usually in case of slabs = 32 pallets = 22,3 t Usually in case of pastilles = 32 pallets = 23 t Liquid = 22-24 t DIMENSIONS AND PACKING OF SOLID PARAFFINS Slabs Dimension 48 cm x 29,5 cm x 5 cm / slab 1 slab = 5 kg 1 carton of slabs = 30 kg net 1 pallet of slabs = 24 cartons = 720 kg net Dimension 800 x 1200 x 1355 / slabs (EUR pallet) Pastilles 1 PE bag of pastilles = 25 kg 1 pallet of pastilles = 27 PE bag = 675 kg net Dimension 800 x 1200 x 1600 / pastilles (EUR pallet) Container Standard packing depends on whether destination port is allowed to receive goods on palette or not. With pallet → 18,5 tons / container Without pallet → 19,44 tons / container From HSE consideration we are not allowed to load any liquid products into containers. We can pack your products in neutral carton boxes or even print per request your own brand name on it. Information concerning ISA PORTAL MOL GROUP WEB ISA USER MANUAL MOLGROUP ISA Brossure Partner Portal registrational assistance What is ISA? ISA is a MOL internally developed online ordering system for our B2B customers. Current Features: bill downloading* COA, CMR, CIN downloading obtaining a loading number (this is useful for FCA transports) order status (blocked, enabled, loaded, invoiced) visibility of information after the loading balance credit limit bills * the commercial invoice can be downloaded, however, the correction, cancellation and proforma will only be available later Short tutorial video: How to get started? Go to this link in order to create a Partner Portal account Fill in all the requested fields at the “Account data” At the end of the Account data sheet, click on “Add new represented company” Give your partner code and company’s name. The partner code (SAP partner ID) can be found on your invoices. Please let us know if you registered then we activate your account. General info regarding the ordering process: first on email you need to ask your sales representative about prices and current availability if you receive the offer from our side you can register your order in ISA (the price won’t be visible) after the confirmation in email the loading number will be visible on ISA webpage the dispatch advice email is still working (sent by chemical_products@mol.hu) in the monitoring menu the following infos are available: Standard-based management systems and certifications To continuously improve the quality level of our products and services we operate and develop the Integrated Management System that complies with Quality (ISO 9001:2015), Environmental (ISO 14001:2015), Energy (ISO 50001:2011) and Occupational Health and Safety (OHSAS 18001:2007) standards. The application of comprehensive quality management tools significantly contributes to operational efficiency improvements, cost-reductions, the development of optimally regulated and reliable processes, as well as to the assurance of customer-focused, well-balanced and increasing product and service quality. Documentation(s) according to REACH regulation: Safety Datasheet (MSDS) List of Unidentified Uses Technical Datasheet (TDS) You can reach our certificates on: https://molgroup.info/en/about-mol-group/standard-based-management-systems-and-certifications ISO 9001:2015 (ENG) ISO 14001:2015 (ENG) ISO 45001:2018 (ENG) ISO 50001:2018 (ENG) Tailor-made product development Our customers can choose the best products which meets their requirements among our product portfolio. For those products where our customers have particular properties requirements, our Team of experts is ready to develop and tailor products and services according to their individual needs. We target to widen our tailor-made portfolio with variety of high-quality customer-dedicated products Let us know which are your requirements Our team will analyse and confirm if we have the possibility to undertake given development Creation of Product → Trial production result → Sending laboratory sample to customer → Industrial sample → Agreeing about the final product specification → TDS, New product Registration Sample sending Providing samples of requested products to our existing Partners and especially to the potential new ones to enable the best choice in product ordering. For the testing purposes we can deliver maximum 5 kg free samples from our products. Up to 5 kg can be combined from our liquid and pastille products, but in case of slabs, a sample of at least 5 kg can be requested (it is a dimension of one slab). For the successful sample dispatch, following data should be provided: Name of the company Address (for the sample dispatch) Contact person: Name / Phone number / E-mail address Product / Quantity If you are a New customer requesting a sample, before we can dispatch it, following steps are needed: Registration of your company in our system (usually takes 2-3 days). For receiving only a free sample, contract is not needed. After successful activation, we will request the sample and inform you about availability and ETA. Liquid Sample dispatch: 1L or 5L metal containers Monitoring and measurement systems To provide the best service level to our Partners we have implemented monitoring and measuring systems which enables us to continuously improve in our processes. Customer Service Level (CSL&OTIF) measure Obtaining data and monitoring service performance enables us to focus on areas for improvements Key account Management Dedicated for the Strategical partners to ensure more proactive individually orientated service Complaint handling management Target: Investigate and analyse Determine root causes Propose corrective actions and improvements FAQ Wax Frequently asked questions (FAQ) Contact Us You can reach out to us directly, using our common, product detailed mailbox: paraffin@mol.hu